XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Improving Turning Circle https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9842 |
Page 1 of 1 |
Author: | ZacLuc888 [ Tue Nov 10, 2009 00:26:29 ] |
Post subject: | Improving Turning Circle |
Author: | marvcat1 [ Tue Nov 10, 2009 07:23:54 ] |
Post subject: | |
Author: | musti72 [ Tue Nov 10, 2009 16:19:03 ] |
Post subject: | |
Author: | Freestyles [ Sat Nov 21, 2009 00:43:43 ] |
Post subject: | |
I also find that decreasing rear toe in a little also helps the car to rotate in corners better. On a tight technical track i find the stock setting a bit much so i decrease by .5-1mm. Have you tried the 1deg off set hubs? |
Author: | T3RR1BL3 [ Sat Nov 21, 2009 10:29:01 ] |
Post subject: | Re: Improving Turning Circle |
Author: | rx7ttlm [ Mon Jan 11, 2010 23:38:44 ] |
Post subject: | |
Author: | grub [ Fri Feb 12, 2010 10:31:31 ] |
Post subject: | |
it could be a couple off thing what spring are you running how many holes in shocks and also the shock positions try putting your ackerman all the way forward and disconect the frount sway bar run 2.5 rear toe in and .05 out on the frount layedthe frount shock all the way down and the rear 2 up from bottom also your droop plays a big part in weight tranfure so try 0 on frount 4 on back also try stiffing your rear bar a little at a time try these and let us know how you go ... do you have a set up i can have look at, to pin point a little better ? all the best grub |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |