XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Front CVD Shafts breaking!!! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9522 |
Page 1 of 1 |
Author: | musti72 [ Sun Jul 26, 2009 23:35:38 ] |
Post subject: | Front CVD Shafts breaking!!! |
Hi, I recently broke one more Universal Shaft of my NT1. It was broken where the axle and shaft meets. It had happened one more time before, since then I was running dogbone on that side and no problem with that... The other CVD on the other side is finally broken from the same place!! Did that happen to you before? I was running 90-100% Dualrate, and it was 25degree on %100. I know that most of the racers run full Dualrate, so it shouldnt be the problem. I ordered my dogbones so I will be running dogbones at all four corners from now on! Anyone experienced? Thanks Mustafa |
Author: | Roelof [ Mon Jul 27, 2009 08:17:42 ] |
Post subject: | |
Yes, my pitman who is running a NT1 has this problem also and he also did swap to the dogbones. |
Author: | Osiris [ Mon Jul 27, 2009 22:42:48 ] |
Post subject: | Re: Front CVD Shafts breaking!!! |
Author: | coupehdi [ Sun Aug 09, 2009 22:35:55 ] |
Post subject: | |
i dont know if this is any help lads but some guys at my local track used to have probs with this on another car some years ago when using or one ways they thought it was perhaps due to if u hit something and the wheel tried to rotate back it snapped the weakest point |
Author: | PDX-Spike [ Mon Aug 10, 2009 19:30:17 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |