| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| NT1 XCA ''high dynamic'' clutch?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9328 |
Page 1 of 2 |
| Author: | ds motorsport [ Sun Jun 07, 2009 21:59:25 ] |
| Post subject: | NT1 XCA ''high dynamic'' clutch?? |
| Author: | Martin Hudy [ Fri Jun 12, 2009 08:33:28 ] |
| Post subject: | |
yes, coming soon. I was testing it and it works great |
|
| Author: | NCALENDA [ Sat Jun 13, 2009 18:36:57 ] |
| Post subject: | |
| Author: | ds motorsport [ Wed Jun 17, 2009 13:47:52 ] |
| Post subject: | |
Ok thank you. @ ncalenda the biggest difference is that it's smaller so lighter then the stock clutch. It looks a bit like the Serpent WC clutch which is very good as well. (I currently use the serpent one on my NT1) |
|
| Author: | _cyclops_ [ Wed Jun 17, 2009 14:52:33 ] |
| Post subject: | Re: NT1 XCA ''high dynamic'' clutch?? |
| Author: | brano [ Thu Jun 18, 2009 09:32:21 ] |
| Post subject: | |
| Author: | PDX-Spike [ Thu Jun 18, 2009 18:52:24 ] |
| Post subject: | |
| Author: | Roelof [ Mon Jun 29, 2009 14:12:51 ] |
| Post subject: | |
http://orange.ap.teacup.com/applet/stc_mania/archive Just a same type clutch with a wider clutchshoe support disc and 2-way mounting flyweights. |
|
| Author: | rx7ttlm [ Mon Jun 29, 2009 16:35:40 ] |
| Post subject: | |
smaller diameter.... |
|
| Author: | ToysRUsKid [ Thu Jul 16, 2009 19:11:53 ] |
| Post subject: | |
| Author: | trini [ Fri Jul 17, 2009 01:27:34 ] |
| Post subject: | |
| Author: | bboy [ Sun Jul 19, 2009 12:17:17 ] |
| Post subject: | |
Is the clutch wheel interchangeable with the old one? I like the black shoes, gives option on the mounting direction, Good! |
|
| Author: | Martin Hudy [ Mon Aug 24, 2009 17:24:07 ] |
| Post subject: | |
| Author: | trini [ Wed Sep 02, 2009 02:20:14 ] |
| Post subject: | |
Martin I have used the High Dynamic this week on a low traction surface but the problem I had was the car pulled off really slow, seemed to take a long time to build up. I tried moving the preload spring to nearly end of thread still nothing, also noticed endplay seemed to be excessive, not too sure if that caused my shoe to have excessive wear. Here are some pics Assistance please guys |
|
| Author: | _cyclops_ [ Wed Sep 02, 2009 17:01:07 ] |
| Post subject: | |
The nut is too tight, the clutch slips too much i think. I found the spring very hard (which is good). But i think the normal 10-11mm default is a bit optimistic. i think i used mine on 10.2 or something, while normally i had 10.8. |
|
| Author: | trini [ Wed Sep 02, 2009 19:48:59 ] |
| Post subject: | |
| Author: | Roelof [ Wed Sep 02, 2009 20:12:27 ] |
| Post subject: | |
| Author: | _cyclops_ [ Thu Sep 03, 2009 09:20:15 ] |
| Post subject: | |
| Author: | trini [ Thu Sep 03, 2009 13:57:01 ] |
| Post subject: | |
| Author: | _cyclops_ [ Fri Sep 04, 2009 10:55:14 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|