XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
rear end sliding https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9288 |
Page 1 of 1 |
Author: | marvcat1 [ Thu May 28, 2009 12:29:48 ] |
Post subject: | rear end sliding |
hey guys i just brought 09' spec nt1. i have set it up as per the recommended setup in the manual. Took the car to the track and i have noticed every time i accelerate i loose rear end traction. When turning, the car oversteers and spin out, when shifting from first to second down the straight away the rear end loses traction. I have the hudy all in one system. I have set the rear droop to 4, front 1. Rear camber 2.5 front 2.0 and rear toe at 2.5 front -0.5. I am so frustrated at this point and would appreicated some direction. |
Author: | _cyclops_ [ Thu May 28, 2009 13:00:30 ] |
Post subject: | |
What tires are you running? |
Author: | Martin Hudy [ Thu May 28, 2009 13:23:32 ] |
Post subject: | |
I suggest to try 3 degrree toe in. Please make sure that clutch is not too tight and for sure try softer tire compoun like 35 in front and 37 in rear. Tires make bigg defference. Make the tire diameter little bigger, small diamter tires have less traction |
Author: | ds motorsport [ Thu May 28, 2009 20:56:14 ] |
Post subject: | |
Author: | marvcat1 [ Fri May 29, 2009 13:06:22 ] |
Post subject: | |
Author: | rcfoolz [ Mon Jun 01, 2009 12:48:25 ] |
Post subject: | |
Author: | marvcat1 [ Wed Jun 03, 2009 12:45:40 ] |
Post subject: | |
Author: | Martin Hudy [ Wed Jun 03, 2009 15:41:23 ] |
Post subject: | |
nice to hear that your car works again I would suggest to try mine worlds set-up. I use this set up everywhere and in all track conditions with only very small changes xform/index.php?act=view&ID=762&setup=nt1 |
Author: | Rwhit007 [ Mon Sep 07, 2009 17:13:11 ] |
Post subject: | |
I have read all of the above info is there any other reason that your car would do this. Mine has been doing this to, on the strait away it did a complete 180*. I thought it was the belts, I checked them they were good. I gave it 3* camber and 3*toe in too soften up the cluch. 'll check the shocks next as was posted here ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |