Yes it is
thanks romuald31
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New belt tensioner https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=9245 |
Page 1 of 1 |
| Author: | ToysRUsKid [ Mon May 18, 2009 20:24:21 ] |
| Post subject: | New belt tensioner |
Just curious if I need the composite deck holder components to use the new tensioner or just the graphite piece? |
|
| Author: | Gordon [ Mon May 18, 2009 20:34:29 ] |
| Post subject: | |
i think the graphite piece is the same.. and the composite deck holders are different... g |
|
| Author: | ToysRUsKid [ Mon May 18, 2009 21:29:41 ] |
| Post subject: | |
So does that mean I need a new top deck to use the new radio plate mounts? |
|
| Author: | romuald31 [ Mon May 18, 2009 23:55:16 ] |
| Post subject: | |
Hello from France, a picture is better than words... |
|
| Author: | ToysRUsKid [ Tue May 19, 2009 01:38:45 ] |
| Post subject: | |
Yes it is
thanks romuald31 |
|
| Author: | romuald31 [ Tue May 19, 2009 12:42:05 ] |
| Post subject: | |
Hello from France, the radio-plate mount is different and the carbon part is different. But no problem, you can use your old radio plate. Au revoir, Romuald |
|
| Author: | ToysRUsKid [ Tue May 19, 2009 14:39:24 ] |
| Post subject: | |
Thanks again. |
|
| Author: | PDX-Spike [ Mon Jun 01, 2009 01:57:35 ] |
| Post subject: | |
| Author: | brano [ Mon Jun 01, 2009 10:14:22 ] |
| Post subject: | |
The part number is same #336230 Composite Radio Plate Mounts (L+R) however they must be marked as V2. Or you can use the new optional |
|
| Author: | PDX-Spike [ Mon Jun 01, 2009 17:44:49 ] |
| Post subject: | |
| Author: | Roelof [ Mon Jun 01, 2009 17:48:22 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Mon Jun 01, 2009 17:54:54 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|