| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Serpent Centax-III fit on NT1 ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=8559 |
Page 1 of 1 |
| Author: | charlie63 [ Tue Dec 16, 2008 14:45:18 ] |
| Post subject: | Serpent Centax-III fit on NT1 ? |
Hi guys, first of all sorry for my English ......  I would like to introduce me, my name is Carlo I live in Italy and I'm an 1/10 touring RC driver since 2005. I started with Serpent and actually I drive a 720 but for this Xmax I will change into NT1 
So, my question is : does Serpent Centax-III fit on NT1 ? , I means can I use complete centax (starting from flywheel to pinions) on NT1 or it is not possible ? Someone did try this solutions ? thanks in advance Carlo |
|
| Author: | Roelof [ Tue Dec 16, 2008 15:01:46 ] |
| Post subject: | |
From my experience with 8th scale clutches I know you can exchange the clutches but have to use the clutchbell and gears of the car. I do not know how it is with 10th scale but if you have the equipment in you reach you can give it a try. |
|
| Author: | thamjk [ Thu Dec 18, 2008 17:23:03 ] |
| Post subject: | Re: Serpent Centax-III fit on NT1 ? |
| Author: | Luis68 [ Tue Jan 06, 2009 12:47:59 ] |
| Post subject: | Re: Serpent Centax-III fit on NT1 ? |
| Author: | charlie63 [ Wed Jan 07, 2009 23:19:38 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|