| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Uneven Wear on Clutch Shoe (Yellow) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=8385 |
Page 1 of 1 |
| Author: | Delboy [ Thu Oct 23, 2008 10:53:22 ] |
| Post subject: | Uneven Wear on Clutch Shoe (Yellow) |
| Author: | Roelof [ Thu Oct 23, 2008 11:27:42 ] |
| Post subject: | |
| Author: | Delboy [ Thu Oct 23, 2008 13:33:00 ] |
| Post subject: | |
| Author: | Roelof [ Thu Oct 23, 2008 18:12:12 ] |
| Post subject: | |
Yes, an unequal dimension will give different forces per flyweight. You can use a long M2 or M3 bolt and nut to pin all the flyweights on so you have them in line and so you can cut them equal. I made a tool for it: Mount shoe and push down the cutter: Thats 1, yet another 3 times 1 of the pins can be moved so I can adjust it between 3 and 4 pins clutch types |
|
| Author: | Delboy [ Thu Oct 23, 2008 20:42:31 ] |
| Post subject: | |
| Author: | Roelof [ Thu Oct 23, 2008 21:22:39 ] |
| Post subject: | |
| Author: | Delboy [ Fri Oct 24, 2008 09:57:08 ] |
| Post subject: | |
| Author: | Roelof [ Fri Oct 24, 2008 11:52:56 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|