| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Weight and servos low profile https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=8224 |
Page 1 of 1 |
| Author: | motorsport [ Wed Sep 10, 2008 22:37:28 ] |
| Post subject: | Weight and servos low profile |
| Author: | Gordon [ Wed Sep 10, 2008 23:09:44 ] |
| Post subject: | |
lighter front diff oil or one way increased toe-out harder front springs, thicker shock oil (for initial turn in) there are more, but these are the simplest, i beleive... g |
|
| Author: | motorsport [ Wed Sep 10, 2008 23:21:58 ] |
| Post subject: | |
Hi, thanks for the answer. but if you put a low profile servo, you would have less steering into the corner? one low profile servo affects to the steering? thanks! |
|
| Author: | KWT-NT1 [ Wed Sep 17, 2008 19:57:18 ] |
| Post subject: | |
i dont think the few grams you save by switching to a low profile servo will effect your steering, on the other hand, your setting will play the major role in your car's behavior. work on your setting, the NT1 is perfectly balanced IMO. |
|
| Author: | Andrew Webber [ Thu Sep 18, 2008 00:53:02 ] |
| Post subject: | |
| Author: | KWT-NT1 [ Thu Sep 18, 2008 01:23:59 ] |
| Post subject: | |
| Author: | motorsport [ Thu Sep 18, 2008 14:04:32 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|