XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
NT1 Clutch Flyweights - Black XR338560 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=7783 |
Page 1 of 1 |
Author: | Delboy [ Wed Jun 04, 2008 09:34:25 ] |
Post subject: | NT1 Clutch Flyweights - Black XR338560 |
When I dismantled the clutch after a race meeting a few weeks ago I noticed that one of the clutch flyweights had a crack on the inside of the hole that slides onto the flywheel pin. When I looked closely it appears that the hole is elongating and eventually cracking. I put three new black flyweights on the flywheel and the same thing has happened again last weekend - again with only one flyweight. Please note that I have replaced the standard clutch spring (supplied) with a harder spring (1.8 mm). Has anyone had this problem as I would be most grateful for any advice. Thank you in advance Derek |
Author: | Diatta Collymore [ Wed Jun 04, 2008 19:12:35 ] |
Post subject: | |
Author: | Delboy [ Wed Jun 04, 2008 19:31:57 ] |
Post subject: | |
Author: | Roelof [ Wed Jun 04, 2008 20:26:12 ] |
Post subject: | |
Author: | Delboy [ Wed Jun 04, 2008 20:30:58 ] |
Post subject: | |
Author: | _cyclops_ [ Thu Jun 05, 2008 10:21:15 ] |
Post subject: | |
Author: | Delboy [ Thu Jun 05, 2008 14:06:12 ] |
Post subject: | |
Author: | Roelof [ Thu Jun 05, 2008 16:34:35 ] |
Post subject: | |
Author: | trini [ Thu Jun 12, 2008 12:34:29 ] |
Post subject: | |
Author: | Delboy [ Sat Jun 21, 2008 17:55:16 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |