XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Problem with 2 speed shaft and first speed housing.... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=7656 |
Page 1 of 1 |
Author: | katze [ Sun May 11, 2008 16:43:06 ] |
Post subject: | Problem with 2 speed shaft and first speed housing.... |
Author: | grub [ Mon May 12, 2008 09:45:24 ] |
Post subject: | Re: Problem with 2 speed shaft and first speed housing.... |
Author: | Roelof [ Mon May 12, 2008 09:49:19 ] |
Post subject: | |
Author: | Poffarbacco [ Mon May 12, 2008 13:43:43 ] |
Post subject: | |
how re-oil the one-way of the 1st bearing? do not put oil on the shaft, or directly inside the bearing! use the hudy tool for the plug, the shaft has the same 6mm diameter!!! so put on the tool 1 or 2 NO MORE drops of the SPECIFIC oil, then let the 1st spin over there ... it's done, that's it!!!!! |
Author: | Gordon [ Sat Feb 14, 2009 18:52:29 ] |
Post subject: | |
Author: | Roelof [ Sat Feb 14, 2009 19:05:17 ] |
Post subject: | |
Author: | Gordon [ Sat Feb 14, 2009 22:00:25 ] |
Post subject: | |
Author: | rcfoolz [ Sun Feb 15, 2009 14:06:38 ] |
Post subject: | |
Author: | Gordon [ Sun Feb 15, 2009 18:20:07 ] |
Post subject: | |
Author: | Delboy [ Tue Feb 17, 2009 09:34:28 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |