XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Fitting a .15 (2.48cc) engine into a NT1 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=6633 |
Page 1 of 1 |
Author: | decksurgeon [ Wed Nov 21, 2007 10:42:28 ] |
Post subject: | Fitting a .15 (2.48cc) engine into a NT1 |
Author: | Mark Christopher [ Wed Nov 21, 2007 12:57:22 ] |
Post subject: | Re: Fitting a .15 (2.48cc) engine into a NT1 |
Author: | Poffarbacco [ Wed Nov 21, 2007 13:47:57 ] |
Post subject: | |
Author: | Roelof [ Wed Nov 21, 2007 15:08:51 ] |
Post subject: | |
Do not get fooled with the knowledge a .15 must be faster than a .12. Current .12 engines are further develloped as the .15 engines. If you want a lot the OS .18 seems to be the best choice. It is one of the most powerfull engines so with a heavy gearing you shoud get a mean machine. |
Author: | decksurgeon [ Thu Nov 22, 2007 05:05:21 ] |
Post subject: | Re: Fitting a .15 (2.48cc) engine into a NT1 |
Author: | decksurgeon [ Thu Nov 22, 2007 05:07:23 ] |
Post subject: | |
Author: | decksurgeon [ Thu Nov 22, 2007 05:10:46 ] |
Post subject: | |
Author: | Roelof [ Thu Nov 22, 2007 08:54:37 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Fri Nov 23, 2007 04:52:56 ] |
Post subject: | |
Hello Decksurgeon, Just want to inform that You might be able to fit OS 21 TZ. It has the same footprint as its little brother 18 TZ. Cheers, Stanley |
Author: | decksurgeon [ Mon Nov 26, 2007 04:21:33 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |