Once I started using +0.75mm front hexes, with a front track width of 198mm and some fuel tubing in the front diff outdrives, I never had a problem with them popping out again. I did not hit too many boards after that though.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| dogbones? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=6045 |
Page 1 of 1 |
| Author: | brian hates nitro [ Mon Aug 20, 2007 00:51:52 ] |
| Post subject: | dogbones? |
| Author: | ldp787 [ Mon Aug 20, 2007 03:13:21 ] |
| Post subject: | Dogbones |
| Author: | brano [ Mon Aug 20, 2007 09:51:01 ] |
| Post subject: | |
Please check this link |
|
| Author: | brian hates nitro [ Mon Aug 20, 2007 14:36:32 ] |
| Post subject: | |
| Author: | brian hates nitro [ Mon Aug 20, 2007 15:45:56 ] |
| Post subject: | |
I found some pictures from the EC championships, all of these drivers appear to be using at least front cvd's but it is difficult to tell for sure on a couple. |
|
| Author: | teamgp [ Mon Aug 20, 2007 16:14:06 ] |
| Post subject: | |
| Author: | brian hates nitro [ Mon Aug 20, 2007 17:53:52 ] |
| Post subject: | |
| Author: | teamgp [ Mon Aug 20, 2007 20:32:11 ] |
| Post subject: | |
Once I started using +0.75mm front hexes, with a front track width of 198mm and some fuel tubing in the front diff outdrives, I never had a problem with them popping out again. I did not hit too many boards after that though.
|
|
| Author: | brian hates nitro [ Mon Aug 20, 2007 20:43:00 ] |
| Post subject: | |
| Author: | mario [ Tue Aug 21, 2007 09:19:46 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|