| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Front hard differential https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5916 |
Page 1 of 1 |
| Author: | methodillo [ Sat Jul 28, 2007 11:21:48 ] |
| Post subject: | Front hard differential |
| Author: | Ryan_Maker [ Sat Aug 04, 2007 12:15:18 ] |
| Post subject: | Re: Front hard differential |
Hey, i would reccomend leaving the spool in the front and playing with the rear diff oil. If you are getting oversteer on-power try going to 30,000 rear diff oil, or even lighter! Also if you are running the 26 tooth side pulley this will give you much more on-power steering.SSo if you have got the 26 on i would reccomend going to a 25 as this should give you less on-power steering. Try laying your rear shocks down a hole or 2 if you have tried everything else 
Good Luck, Regards Ryan |
|
| Author: | methodillo [ Mon Aug 06, 2007 00:02:24 ] |
| Post subject: | |
thanks.. i'll try it next week..hope it'll be aight... |
|
| Author: | _cyclops_ [ Mon Aug 06, 2007 08:47:13 ] |
| Post subject: | Re: Front hard differential |
| Author: | Adam Walker Catchpole [ Mon Aug 06, 2007 11:58:00 ] |
| Post subject: | Front Hard Differential |
| Author: | teamgp [ Mon Aug 06, 2007 15:08:59 ] |
| Post subject: | Re: Front hard differential |
| Author: | _cyclops_ [ Mon Aug 06, 2007 21:02:20 ] |
| Post subject: | Re: Front hard differential |
| Author: | teamgp [ Tue Aug 07, 2007 16:08:25 ] |
| Post subject: | Re: Front hard differential |
| Author: | _cyclops_ [ Tue Aug 07, 2007 18:27:06 ] |
| Post subject: | Re: Front hard differential |
| Author: | teamgp [ Tue Aug 07, 2007 18:54:16 ] |
| Post subject: | Re: Front hard differential |
| Author: | _cyclops_ [ Tue Aug 07, 2007 21:56:54 ] |
| Post subject: | Re: Front hard differential |
| Author: | _cyclops_ [ Sun Aug 12, 2007 17:39:57 ] |
| Post subject: | |
well i got some tracktime today, totally different conditions though... the rear was a little hard but changing th shock positions on the rear and changing the dampening worked out well.... Just another question, with a solid front axil, what camber settings are you guys using? |
|
| Author: | teamgp [ Mon Aug 13, 2007 14:21:51 ] |
| Post subject: | |
| Author: | _cyclops_ [ Tue Aug 14, 2007 14:26:11 ] |
| Post subject: | |
| Author: | teamgp [ Tue Aug 14, 2007 14:38:33 ] |
| Post subject: | |
| Author: | _cyclops_ [ Tue Aug 14, 2007 16:13:42 ] |
| Post subject: | |
| Author: | teamgp [ Tue Aug 14, 2007 16:36:52 ] |
| Post subject: | |
| Author: | _cyclops_ [ Wed Aug 15, 2007 08:36:08 ] |
| Post subject: | |
| Author: | teamgp [ Wed Aug 15, 2007 21:10:54 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|