| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Car Push https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5886 |
Page 1 of 1 |
| Author: | trini [ Sun Jul 22, 2007 05:03:24 ] |
| Post subject: | Car Push |
| Author: | Diatta Collymore [ Sun Jul 22, 2007 06:19:52 ] |
| Post subject: | |
| Author: | MarvS3 [ Sun Jul 22, 2007 11:58:54 ] |
| Post subject: | |
| Author: | brian hates nitro [ Sun Jul 22, 2007 15:40:03 ] |
| Post subject: | |
| Author: | trini [ Sun Jul 22, 2007 18:28:46 ] |
| Post subject: | |
Thanks guys I forgot to mention, I am running 38F 40R, with front roll bar disconnected and rear adjustable blade flat. Front Droop 0, Rear droop 4. All other settings are on the basic setup. Hope the added information helps |
|
| Author: | brian hates nitro [ Sun Jul 22, 2007 18:44:21 ] |
| Post subject: | |
| Author: | teamgp [ Mon Jul 23, 2007 03:26:05 ] |
| Post subject: | |
| Author: | Diatta Collymore [ Mon Jul 23, 2007 03:49:08 ] |
| Post subject: | |
| Author: | trini [ Mon Jul 23, 2007 04:08:19 ] |
| Post subject: | |
| Author: | _cyclops_ [ Mon Jul 23, 2007 22:25:34 ] |
| Post subject: | |
might be a stupid question, so don't blame me, are u sure the clutch is disengaging properly when you let go of the throttle? I haven't seen this with the xray clutches but sometimes it stickes because of a bad configured clutch, this gives massive push in the car... |
|
| Author: | trini [ Mon Jul 23, 2007 22:43:13 ] |
| Post subject: | |
how can I tell ?? I basically followed the clutch setup from the book, but I am willing to look at anything. |
|
| Author: | _cyclops_ [ Tue Jul 24, 2007 07:52:16 ] |
| Post subject: | |
| Author: | Ryan_Maker [ Tue Jul 24, 2007 11:59:59 ] |
| Post subject: | Pushing |
| Author: | trini [ Sun Aug 12, 2007 04:13:31 ] |
| Post subject: | |
| Author: | teamgp [ Sun Aug 12, 2007 06:12:13 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|