| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Optional 4mm stiff chassis https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5807 |
Page 1 of 1 |
| Author: | teamgp [ Thu Jul 05, 2007 22:05:22 ] |
| Post subject: | Optional 4mm stiff chassis |
Has anyone tried the new yet? Especially on a high grip track. If so, how did it handle and did you have to make any changes to your setup? I have a race this weekend on a high grip smooth & fast track and thought about using it for the first time. Anyone tried the 4mm chassis, as well as the standard chassis with the ? I'd be interested to know the differences between each type of *stiff* chassis setup as well. |
|
| Author: | Niklas H [ Thu Jul 05, 2007 22:18:50 ] |
| Post subject: | 4 mm chassie |
The car will have more steering and be more stable and very easy to drive, when you have high grip in the track. When I use 4 mm chassie I normaly do not change anything on the setup. Do not use 4 mm chassie when the grip level is low. |
|
| Author: | teamgp [ Thu Jul 05, 2007 22:34:46 ] |
| Post subject: | |
Thanks Niklas! Did you try the original chassis with the multi-flex engine mount? |
|
| Author: | Niklas H [ Thu Jul 05, 2007 22:52:49 ] |
| Post subject: | 4 MM chassie |
No, I have not yet tried the multi-fléx engine mount, we normaly do not have high grip tracks in Sweden. It has rained on half of the races this season. All top three XRAY NT1 used the 4 mm chassie on the Nordic Championchip this weekend, the grip was very good. I think you will like the 4 mm chassie if grip is high. |
|
| Author: | teamgp [ Mon Jul 09, 2007 21:30:03 ] |
| Post subject: | |
You were right! The 4mm chassis was great on the high grip track. 
I had a chance to run the car in practice the day before the race, while the grip was more on the medium side (prior to them spraying the track with traction compound). The rear was loose, but all I had to do to get the car to handle well without oversteer was increase the rear toe-in to 2.5d. |
|
| Author: | wvince [ Wed Jul 11, 2007 03:17:16 ] |
| Post subject: | |
| Author: | sns820 [ Wed Jul 11, 2007 18:36:48 ] |
| Post subject: | |
| Author: | brano [ Thu Jul 12, 2007 06:36:54 ] |
| Post subject: | |
Contact XRAY USA at xray@rcamerica.com and they will let you know where and how to get the |
|
| Author: | grbrum [ Wed Jul 25, 2007 20:47:31 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|