Bumpy Track Set-ups

ryanspitman · **Posted:** Mon Sep 24, 2007 03:47:51

Hi guys, we are currently running on a Mixed-Med grip Ashphalt track which is very bumpy. We are running Stock set-up except for Wide front bumper and rear shock position laid down to 2nd lowest hole.
We are also running Blue 25lb springs all around. Car is reasonable but does any one have any suggestions to make the car handle the bumps better through FAST sweepers. The Car gets about 3/4 of the way through the sweeper then SNAP oversteers and spins out. Thanks in advance.

rcfoolz · **Joined:** Mon Oct 17, 2005 04:23:09 **Posts:** 66

Diatta Collymore · **Posted:** Mon Sep 24, 2007 23:48:10

You can try raising the Ride height of the car, and adding some more chamber to the rear. What shock pistons, and what shock oil are you running? :?:

ryanspitman · **Posted:** Tue Sep 25, 2007 02:23:08

Car snaps out usually OFF throttle. But if i run a harder front spring it understeers to much,car is slow to change direction compared to our 007.
Running 600cst shock oil. 3 holes open on the rear and 2 open on the front.

teamgp · **Posted:** Tue Sep 25, 2007 02:52:09

teamgp · **Posted:** Tue Sep 25, 2007 03:10:15

Helge Johannessen · **Posted:** Tue Sep 25, 2007 10:26:36

teamgp · **Posted:** Tue Sep 25, 2007 15:58:23

ryanspitman · **Posted:** Wed Sep 26, 2007 01:53:05

reddevil · **Posted:** Wed Sep 26, 2007 06:16:58

Helge Johannessen · **Posted:** Wed Sep 26, 2007 08:49:47

reddevil · **Posted:** Wed Sep 26, 2007 12:21:05

One more question Mr.Helge, you stated that the track has high grip,so why using lowest roll centre for the rear? Any particuliar reason for this? Thanks again?

XRAY - Model racing cars

Bumpy Track Set-ups

Who is online