Hey Maarten
I found out today, i drive the same engine and it's way to low geared.
Hope to get other pinions this week..
Thanks for the reply man!
Greets, Ron
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Gearing? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5514 |
Page 1 of 2 |
| Author: | Ron4you [ Fri May 18, 2007 14:58:27 ] |
| Post subject: | Gearing? |
| Author: | Roelof [ Fri May 18, 2007 15:27:42 ] |
| Post subject: | |
| Author: | Ron4you [ Fri May 18, 2007 15:44:53 ] |
| Post subject: | |
| Author: | wvince [ Mon May 21, 2007 05:56:50 ] |
| Post subject: | |
Gearing also depends on tire diameter. On a large 8th scale track I ran 2 teeth higher than the kit pinions. I also ran the tire diameter at 63 rear and 61 front, to start. |
|
| Author: | M.van Lierop [ Mon May 21, 2007 13:20:59 ] |
| Post subject: | |
Hi Ron, When your driving at the track in Heemstede you realy need to change the gearing. With the standaard pinions and spurs in won't work because its way to smal. I drive a Mega MF engine and i use 18/59 and 23/54. 17/59 will also work at heemstede. so you only need to change the pinions and you can use the standaard 59 and 54 spurs. Greetz, Maarten |
|
| Author: | Ron4you [ Mon May 21, 2007 18:15:03 ] |
| Post subject: | |
Hey Maarten I found out today, i drive the same engine and it's way to low geared. Hope to get other pinions this week..
Thanks for the reply man! Greets, Ron |
|
| Author: | Roelof [ Mon May 21, 2007 18:45:36 ] |
| Post subject: | |
Is the choice of the pinions in the kit wrong chosen ? I think a tracksize like Heemstede is common in most parts of the world. |
|
| Author: | M.van Lierop [ Mon May 21, 2007 18:57:34 ] |
| Post subject: | |
Hi roelof, I agree when your saying that heemstede is a common track size for tracks all over the world, but it depants on what engine you drive. I thought that if you drive a CRf engine that you need a smaller gearing then the MF. and then the gearing in the kit is maybe alright. Greetz, Maarten |
|
| Author: | Roelof [ Mon May 21, 2007 20:44:16 ] |
| Post subject: | |
Yes, CRF needs a light gearing but is that the reason to choose the current pinions ? I can not imagine that because the CRF is at this moment not a well used motor. Most 8th scale cars come with a gearing usefull for Novarossi (based), Picco (based) and Sirio (based) engines which take for 90% of the market of the racing scene. Or is it better to include the 2 types of gearing ? |
|
| Author: | M.van Lierop [ Mon May 21, 2007 22:05:50 ] |
| Post subject: | |
| Author: | Ron4you [ Mon May 21, 2007 22:57:16 ] |
| Post subject: | |
| Author: | mario [ Wed May 23, 2007 08:44:27 ] |
| Post subject: | |
| Author: | mtveten [ Wed May 23, 2007 18:02:01 ] |
| Post subject: | |
| Author: | Robbruijn [ Wed May 23, 2007 20:14:56 ] |
| Post subject: | |
| Author: | Ron4you [ Wed May 23, 2007 22:27:21 ] |
| Post subject: | |
| Author: | _cyclops_ [ Thu May 24, 2007 11:49:39 ] |
| Post subject: | |
| Author: | Ron4you [ Thu May 24, 2007 12:03:30 ] |
| Post subject: | |
| Author: | Roelof [ Thu May 24, 2007 16:59:00 ] |
| Post subject: | |
| Author: | Ron4you [ Thu May 24, 2007 18:25:19 ] |
| Post subject: | |
| Author: | _cyclops_ [ Thu May 24, 2007 19:57:07 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|