XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Springs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5483 |
Page 1 of 1 |
Author: | mtveten [ Mon May 14, 2007 19:20:49 ] |
Post subject: | Springs |
Mario, What is the reasoning for the shorter front spring and why shouldn't we use the existing electric springs? When I built my car I found that I needed to run a significant amount pre-load(6mm) on the front shocks to make attain a reasonable ride height with new tires. I checked my old electric springs and they seem to fit just fine at both ends of the car. Other than the length of the front spring what is the difference between the NT1 and electric springs? Assuming one can achieve their desired ride height would your electric springs work properly on both ends of the car? Thanks, Mark |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |