XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Binding Issues https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=5475 |
Page 1 of 1 |
Author: | PDX-Spike [ Sun May 13, 2007 18:21:04 ] |
Post subject: | Binding Issues |
I'm having problems with a 332660 Steering & Servo Ball Joint and 333240 Ball Universal AND the 333460 Anti-Roll Bar Ball Joint and 303241 Ball Universal. Three of the four of each work perfectly One of each set are binding and squeak when operated. The alignment on both are perfect. The binding is severe. ![]() Is the solution to just replace the parts and try again or can it be repaired? I've never encountered this problem before. Thanks in advance for any information offered. |
Author: | Alan Lunghi [ Sun May 13, 2007 19:18:14 ] |
Post subject: | |
Author: | PDX-Spike [ Mon May 14, 2007 00:37:01 ] |
Post subject: | |
Author: | althea [ Mon May 14, 2007 02:11:21 ] |
Post subject: | |
Author: | PDX-Spike [ Mon May 14, 2007 02:22:00 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |