| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| NT1 steering & throttle SERVOs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=19446 |
Page 1 of 1 |
| Author: | Refsiul22 [ Thu Dec 01, 2016 23:40:25 ] |
| Post subject: | NT1 steering & throttle SERVOs |
hi guys. I'm currently building my NT1 2016 could you recommend what steering & throttle servos specifications do I need? Low profile? Checked the manual but it doesn't say. |
|
| Author: | Refsiul22 [ Fri Dec 02, 2016 05:51:32 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
Do I need regular o low profile servos? For Steering --> do I need more Torque? For Throttle --> do I need more Speed? |
|
| Author: | Roelof [ Sun Dec 04, 2016 12:21:40 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
No, no special need for low profile but they look nicer. Be wise, use the same servo for throttle and steer so you can buy a 3rd as spare. Speed? 0.1 sec over 60 degrees or faster Torque? 8kg or more |
|
| Author: | Refsiul22 [ Sun Dec 04, 2016 20:48:16 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
Thanks! I'm interested in this Savox 1251 Speed @ 6.0V: .09 Torque @ 6.0V: 125 oz-in / 9.0 kg-cm Type: Low Profile Gear: Metal Have been asking before purchase just to be 100% sure. And also, I wasn't sure that I want to spend $150+ on each servo |
|
| Author: | Roelof [ Mon Dec 05, 2016 21:15:53 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
It is a more used servo but....... it is 6v, the use of a LiPo battery pack can only be done with a high power UBEC or otherwise a LiFePo or the good old NiMh pack. To be honest, skip the option for LiPo. |
|
| Author: | marvcat1 [ Wed Jul 12, 2017 04:38:43 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
Currently using th Savox 1251 for throttle application on my 2015 NT1. I'm using the Futaba 3PKS-R radio system with an xceed 7.4 lipo receiver pack with no issues at all. It's been 2yrs and no issues at all. |
|
| Author: | Roelof [ Thu Jul 13, 2017 11:45:46 ] |
| Post subject: | Re: NT1 steering & throttle SERVOs |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|