| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Steering Blocks https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=19104 |
Page 1 of 1 |
| Author: | a.christie80 [ Wed Aug 05, 2015 02:42:01 ] |
| Post subject: | Steering Blocks |
Hello Currently have a 2014 NT1 and am wondering if any geometry changed with the new steering blocks on the 2015 or was it just to allow for the Aero Disc? I see now Xray has just released a new 1 degree king pin steering hub, are the original ones zero? Thank you in advance Andrew |
|
| Author: | Mustafa Alp [ Wed Aug 05, 2015 21:03:01 ] |
| Post subject: | Re: Steering Blocks |
Originals are zero in 2014 and 2015 cars Geometry change between 14 and 15 is, you have the steering link outer mounting position 4mm lower on the new car, which makes the car turn in little bit better in my opinion. |
|
| Author: | a.christie80 [ Thu Aug 06, 2015 01:22:29 ] |
| Post subject: | Re: Steering Blocks |
| Author: | Mustafa Alp [ Thu Aug 06, 2015 22:10:36 ] |
| Post subject: | Re: Steering Blocks |
If you mount if underneath the hub, it will be much more than 4mm as you have to take account the height of the pivotball, so it wont work. 2015 hubs fit on 2014 car |
|
| Author: | Azul. [ Tue Aug 11, 2015 17:02:06 ] |
| Post subject: | Re: Steering Blocks |
Hi, I mount these parts in my nt1 2014, and added 4mm washers,after and test and test much the car work correctly, also use the aerodynamic discs and noticed slight improvement in the car. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|