XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Engine mount lower https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=18807 |
Page 1 of 1 |
Author: | Azul. [ Thu Sep 18, 2014 19:40:34 ] |
Post subject: | Engine mount lower |
hello. the engine mount "lower" makes the engine touches the chassis? for xray nt1 2014, greetings. |
Author: | brano [ Fri Sep 19, 2014 12:35:21 ] |
Post subject: | Re: Engine mount lower |
The #338717 Thin lower engine mounts must be used with #338534 Alu Flywheel Reverse XCA- Flat 30mm. |
Author: | Azul. [ Sat Oct 04, 2014 01:38:52 ] |
Post subject: | Re: Engine mount lower |
Thanks, those references have in the car, but that's not the problem, the problem is that the Crankcase touches the chassis. the Crankcase at its lowest point in contact with the chassis and my question is if it is normal to happen with the bench "lower" and if there is any risk of breaking some sort. in this video you can see what I want to explain, as the engine touches the chassis, in the second 12 (0:12) http://youtu.be/0ma7Li_qiig |
Author: | Green Wing [ Sun Oct 05, 2014 19:44:02 ] |
Post subject: | Re: Engine mount lower |
Author: | Azul. [ Sun Oct 05, 2014 22:04:11 ] |
Post subject: | Re: Engine mount lower |
hi, I also have the piece that includes the kit, but I put that option, I also engine Novarossi PT and it is exactly the same problem. |
Author: | Green Wing [ Mon Oct 06, 2014 23:59:53 ] |
Post subject: | Re: Engine mount lower |
Ok. But then the Novarossi engines have their mounts a little lower, too. If you have both mounts then use the ones that fit. The kit mounts should work with all engines, some engines may sit a little higher with the kit mounts. |
Author: | Azul. [ Tue Oct 07, 2014 00:40:34 ] |
Post subject: | Re: Engine mount lower |
yes, it is true, today I tried five engines,Sirio XXX and Nemesis touches the chassis,Novarossi PT & Flash touches the chassis, Plus 3 STC NOT touch the chassis. to save me trouble I remount the standard engine mount included in the kit. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |