| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| ORCAN GT3 factory carb setup. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=13615 |
Page 1 of 1 |
| Author: | fermente [ Tue Jul 30, 2013 17:18:11 ] |
| Post subject: | ORCAN GT3 factory carb setup. |
Hello, Could you please advise with the factory setup for ORCAN GT3-C and also ORCAN GT3-S engines (carb setup) Thank you |
|
| Author: | Roelof [ Tue Jul 30, 2013 19:27:07 ] |
| Post subject: | Re: ORCAN GT3 factory carb setup. |
Have you tryed the Orcan website? They are Novarossi based engines like RB, JPGimar and MAX so you should be able to find a setting. Mostly setting both needles to flush it should be startable. |
|
| Author: | fermente [ Wed Jul 31, 2013 11:39:00 ] |
| Post subject: | Re: ORCAN GT3 factory carb setup. |
Hi, I couldn't find any information about the carb factory setup in ORCAN's website. Thank you anyway. I will try to use the data from Novarossi. |
|
| Author: | Sam Craig [ Thu Aug 08, 2013 03:49:54 ] |
| Post subject: | Re: ORCAN GT3 factory carb setup. |
I have a new engine gt3c and checked: Idle 2.5 turns out High speed needle 5.0 turns out Low speed needle 2.5 turns out |
|
| Author: | fermente [ Thu Aug 08, 2013 17:22:41 ] |
| Post subject: | Re: ORCAN GT3 factory carb setup. |
Thank very much. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|