XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
NT1 2011 graphite chassis inserts https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=13369 |
Page 1 of 1 |
Author: | Shakey78 [ Tue Feb 05, 2013 06:12:09 ] |
Post subject: | NT1 2011 graphite chassis inserts |
Question the Graphite chassis inserts, dose any body use them? as mine do not fit or sit in tight they are free to move up, and the little fixing tabs don't fit in the slots on the chassis any ideas on these's inserts, as ive been running my car with out them so far 3 race meetings |
Author: | SupadanNT1 [ Sat Feb 09, 2013 09:39:20 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
hay i belive you are from canberra also. i run both grafite in mine and it drives like a dream. havnt played with the brass ones yet, i found those little mounting things a real pain to get in aswell i ended up taking the chassis off and doing it that way |
Author: | Shakey78 [ Sat Feb 09, 2013 12:40:07 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
thanks that's not what I wanted to hear that I have to pull it completely apart oh well I guess its time for a big clean now, supadanNT1 you race in Canberra?? |
Author: | Shakey78 [ Tue Feb 12, 2013 12:55:02 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
Arh huh I see now the tabs for the inserts go in to a slot, so now I have them installed and I will see if I go quicker.. |
Author: | Hagberg [ Mon Mar 11, 2013 17:46:17 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
They decrease chassis flex which can be useful for very high traction conditions. Try to use the insert only in the front for a start, which will remove a bit of front grip. |
Author: | Roelof [ Tue Mar 12, 2013 13:51:12 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
Do these inserts also improve the ground effect? |
Author: | Hagberg [ Sun Mar 17, 2013 14:49:08 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
I never thought about it, thanks for bringing this up. Yes by theory this should reduce drag from underneath the chassis. |
Author: | Roelof [ Sun Mar 17, 2013 15:35:56 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
Once I have driven with my 1/8 a full sized chassis plate (epoxy screwed against the original chassis) with only holes for the flywheel and tires and it is amazing how much grip you have, already before 2nd speed it acted like a slotcar. |
Author: | Hagberg [ Tue Mar 26, 2013 15:38:37 ] |
Post subject: | Re: NT1 2011 graphite chassis inserts |
Thanks for the info. I will do more testing with the chassis inserts in the future. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |