Hi there,
I would like to ask same help with tyre wear on a new NT1 World edition that i just finished building and tested on the track. I used the standard set-up that comes with the car, a new set of matrix tires (diam.65mm) 35 in front and 37 on the rear of the car. At the end of 30 minutes the rear tires were almost on the plastic 55mm, and the front tires were like new with 3mm wear 62mm. I used the side pulley 25 as it is on the standard set-up.
Does any one as same suggestions for this problem or what to change on the set-up?
Thanks
|