XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Shocks and springs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=13183 |
Page 1 of 1 |
Author: | Shakey78 [ Wed Dec 19, 2012 13:37:54 ] |
Post subject: | Shocks and springs |
Ok I have just put together my NT1 2011 model and I have my shocks all done but when installing the silver standard springs the rear shocks are okay but the front short springs seam too short as I have to screw the collar almost off to get any tension on the spring, any ideas on what's up ?? I did notice that in the build notes is said not to use the ball joints from the parts frame 309330 and to use part 308316 umm where is this part?? Any help would be great |
Author: | Hagberg [ Mon Dec 24, 2012 01:17:37 ] |
Post subject: | Re: Shocks and springs |
You should use the short ball joints. How much droop are you using? If too much or too little the preload will be messed up. |
Author: | Shakey78 [ Mon Dec 24, 2012 12:28:40 ] |
Post subject: | Re: Shocks and springs |
Yes that would work but the shocks aren't even installed and the springs are loose, when installed I can only get two to three threads on the collar or the spring just flops around, these spring seam to be 3-4mm too short, I have the car set to the exact basic set up, I did use the short ball joints as that was all that was in the kit. |
Author: | Shakey78 [ Mon Dec 31, 2012 14:32:46 ] |
Post subject: | Re: Shocks and springs |
Ok can some one give me the length of the silver front standard springs so I can check mine are correct please kind of urgent |
Author: | brano [ Wed Jan 02, 2013 07:58:55 ] |
Post subject: | Re: Shocks and springs |
The front springs for NT1 are 22mm long and the rear ones are 26mm long. |
Author: | Shakey78 [ Wed Jan 02, 2013 23:14:04 ] |
Post subject: | Re: Shocks and springs |
Well my front springs are 19.3mm long, my rear springs are spot on, so do you think my spring are incorrect length for the front? I would assume not |
Author: | brano [ Thu Jan 03, 2013 07:45:39 ] |
Post subject: | Re: Shocks and springs |
The minimal lenght of the front springs should be 21.5mm, please check again the lenght. Do you have a brand new NT1 2011 edition or second hand? as in year 2010/2011 XRAY does not offered such short springs. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |