| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| NT1 2012 Spec - play between wheel nut and hub bearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=12833 |
Page 1 of 1 |
| Author: | moveon [ Thu Sep 06, 2012 08:46:51 ] | ||
| Post subject: | NT1 2012 Spec - play between wheel nut and hub bearing | ||
Hi all, I am building my NT1 2012 Spec and I found that I have about 2mm of play between the wheel nut and hub bearing. It happened to all the four wheels. This version is using the CVD for all four wheels. Refer to the red arrow. Is this normal?
|
|||
| Author: | Jan [ Mon Sep 10, 2012 09:43:43 ] |
| Post subject: | Re: NT1 2012 Spec - play between wheel nut and hub bearing |
Hi moveon, make sure you press the wheel hub all the way down until you hear and feel it clicks into the place. |
|
| Author: | moveon [ Tue Sep 11, 2012 01:41:19 ] |
| Post subject: | Re: NT1 2012 Spec - play between wheel nut and hub bearing |
Hi mod, Yes, you are right. The wheel nut didn't sit in fully. I installed wheels when it arrives and the play is gone. I have since break-in my RB TX engine with 6 tanks now. Now waiting for the setup kit to make adjustment. 
|
|
| Author: | moveon [ Tue Sep 11, 2012 02:37:44 ] | ||
| Post subject: | Re: NT1 2012 Spec - play between wheel nut and hub bearing | ||
Here is a photo of my NT1 with Radiopost Radio. The battery pack has not arrive so I am using futaba RX pack to break-in engine at the moment. Still waiting for the setup kit to arrive....
|
|||
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|