XRAY - Model racing cars

Is there any helpful advice i should know before building

Follow the manual as closely as possible. Make sure that the bottom plastic seals in the shock are free and don't bind up with the shock rod. If needed, you can ream them with a 3mm reamer tool. Add medium loctite where necessary throughout.

Thankyou Alex ! Also wondering where i can buy one of the new orcan motors

ORCAN engines are sold by SMI Motorsport in Germany: http://www.smi-motorsport.de/

SMI doesn't sell directly but you can order it here i.e.:

http://www.mrt-rcshop.de/epages/6307928 ... -S%20MH%22

Please note that it's the MH tuned "S" version with loads of torque for small and medium tracks. A "C" version for medium to big tracks like Lostallo or Fiorano is also available and a standard Orcan GT3 engine or the box is available, too, for a more reasonable price in case you don't want to spend the extra money for the MH version. Of course even the standard GT3 is not a budget motor. Together with the Sirio Nemesis and the O.S. Speed V3 the fastest I've ever seen (as MH version).

AND: If you have a problem you can send it to SMI and they will check it for you. They also provide a re-build service if wanted.

GT3-S (MH) Steel main bearing:
http://www.rc-car-news.de/pnews_mag/22_ ... wnews=3281

GT3-C (MH) Ceramic main bearing:
http://www.rc-car-news.de/pnews_mag/22_ ... wnews=3282