Hi ... which flywhell cone do you use??
I dont use the xray original clutch anymore but if I remember correct using the Xray cone for Novarossi you can get the 9mm distance..
..however try different cones if you have some
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| clutch settings with novarossi engine https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=11361 |
Page 1 of 1 |
| Author: | Aaron w [ Sat Apr 30, 2011 21:58:18 ] |
| Post subject: | clutch settings with novarossi engine |
Has anybody has to fit a different make thrust bearing holder? With no spacers behind the flywheel i still dont have 9mm of shaft showing which means i can only get a small clutch gap, hence using a longer thrust bearing holder. Anyone else had this problem? |
|
| Author: | Aaron w [ Fri May 06, 2011 14:25:38 ] |
| Post subject: | Re: clutch settings with novarossi engine |
anyone? |
|
| Author: | NikoRacing [ Fri May 06, 2011 18:36:04 ] |
| Post subject: | Re: clutch settings with novarossi engine |
Hi ... which flywhell cone do you use?? I dont use the xray original clutch anymore but if I remember correct using the Xray cone for Novarossi you can get the 9mm distance.. ..however try different cones if you have some
|
|
| Author: | Aaron w [ Fri May 06, 2011 18:42:26 ] |
| Post subject: | Re: clutch settings with novarossi engine |
im using all genuine xray parts. Will try some other cones |
|
| Author: | Chickentrader [ Wed Sep 07, 2011 06:58:13 ] |
| Post subject: | Re: clutch settings with novarossi engine |
Could anyone help me with information of how the pin hole positions of fly weights affects the functioning of the clutch. Would using the pin holes to the right make the clutch slip more. or would it make the clutch more aggressive? |
|
| Author: | Roelof [ Thu Sep 08, 2011 08:33:21 ] |
| Post subject: | Re: clutch settings with novarossi engine |
| Author: | Chickentrader [ Fri Sep 09, 2011 22:14:29 ] |
| Post subject: | Re: clutch settings with novarossi engine |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|