| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| how to 'tweak' nt1? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=11204 |
Page 1 of 1 |
| Author: | roger999 [ Wed Mar 09, 2011 11:27:10 ] |
| Post subject: | how to 'tweak' nt1? |
hi, just wanted to know how you guys check tweak of your car? Just got setup wheels and when i check tweak on that wheels car is not tweaked, but when i put foam wheels car is tweaked... My all foam wheels are same sizes 59/60. |
|
| Author: | Roelof [ Wed Mar 09, 2011 12:07:50 ] |
| Post subject: | Re: how to 'tweak' nt1? |
With foam tires finding a good tweak setting is not easy to find because the tire wear is not equal and most of the time the rims are not straight. Just get close to it or set it out of tweak so with the tire wear it will come to a good tweak. |
|
| Author: | roger999 [ Thu Mar 10, 2011 10:16:14 ] |
| Post subject: | Re: how to 'tweak' nt1? |
thanks for that but don't really understand what you mean: set it out of tweak? |
|
| Author: | Mark Christopher [ Thu Mar 10, 2011 10:22:09 ] |
| Post subject: | Re: how to 'tweak' nt1? |
set the cars tweak with the set up wheels, you then know the car is 100%, i would never set a car out of tweak?? |
|
| Author: | roger999 [ Thu Mar 10, 2011 11:36:20 ] |
| Post subject: | Re: how to 'tweak' nt1? |
Thanks Mark, yep that's why i didn't nderstand why he said to set it out of tweak... Better is do that with tweak station like 3racing or Hudy or just do that by 'hand'? |
|
| Author: | Roelof [ Thu Mar 10, 2011 14:27:29 ] |
| Post subject: | Re: how to 'tweak' nt1? |
The tire wear during a race will always make a car go out of tweak |
|
| Author: | Mark Christopher [ Thu Mar 10, 2011 17:19:47 ] |
| Post subject: | Re: how to 'tweak' nt1? |
| Author: | roger999 [ Thu Mar 10, 2011 20:59:51 ] |
| Post subject: | Re: how to 'tweak' nt1? |
Laser? Can you tell me what brand and where i can get it? |
|
| Author: | Roelof [ Fri Mar 11, 2011 11:47:41 ] |
| Post subject: | Re: how to 'tweak' nt1? |
It is from Topcad but they do not make them anymore.... |
|
| Author: | roger999 [ Fri Mar 11, 2011 13:38:02 ] |
| Post subject: | Re: how to 'tweak' nt1? |
i have found on the web Team Integy, and there is few on ebay... Try to get one if is good. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|