| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| clutch bell high dinamic https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=11032 |
Page 1 of 1 |
| Author: | gionni63 [ Sat Jan 01, 2011 17:16:01 ] |
| Post subject: | clutch bell high dinamic |
Hi guys I am a new member of the forum and I am a Southern Italian and wanted to ask information about our NT1 since they are already several years that I have and I have won and given so much satisfaction. I ask the new clutch high dinamic some information as it mounted with the high court on 3x3 screeds and red and the strain that is sublime to say the top is incredible but I have used many good friction type capricorn, Schepis,, jp, and the new xray clutch and portentous. however, this time of year with temperatures near zero and low-grip tracks after two races I thought I would remove the strain put a red and yellow more 'soft and are also in doubt whether to lift the grains of the substrate. I would like a advice on how to behave, taking into account the distance that I have bell and spring hurd 0.4 to 0.7. .. thanks for the answers in advance giovanni valletta |
|
| Author: | Pahissa [ Wed Jan 05, 2011 12:18:26 ] |
| Post subject: | Re: clutch bell high dinamic |
Hi Giovanni I always use a clearance of 0.4 - 0.6. Mid XRAY spring with 9.7mm from the tip of the cranckshaft and yellow or red cluthc depending on track grip. High grip red, rest yellow. All the best |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|