Just a quick question, has the new roll centre bridge (one with refined holes) got a different part number? I ordered part number 33 3060 and it has only got 4 holes? Also the rear shock tower with refined holes? Cheers Aaron
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| roll centre bridge https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10940 |
Page 1 of 1 |
| Author: | Aaron w [ Sat Nov 20, 2010 02:20:39 ] |
| Post subject: | roll centre bridge |
Just a quick question, has the new roll centre bridge (one with refined holes) got a different part number? I ordered part number 33 3060 and it has only got 4 holes? Also the rear shock tower with refined holes? Cheers Aaron
|
|
| Author: | Delboy [ Sat Nov 20, 2010 15:00:13 ] |
| Post subject: | Re: roll centre bridge |
| Author: | Aaron w [ Sat Nov 20, 2010 15:15:25 ] |
| Post subject: | Re: roll centre bridge |
Hello mate, i dont want to order the 3mm one and end up with another 4 hole one. I dont think i will make adur, got lots to do. Im out of touch with it all. Can anyone from xray confirm the correct part number for the roll centre bridge and shock tower? |
|
| Author: | Mark Christopher [ Sat Nov 20, 2010 15:58:04 ] |
| Post subject: | Re: roll centre bridge |
http://www.teamxray.com/teamxray/produc ... e=Graphite Roll-Center Bridge 3.0mm - V2 http://www.teamxray.com/teamxray/produc ... tName=XRAY NT1 World Champion Limited Edition - Graphite Shock Tower Rear 3mm - V2 |
|
| Author: | Delboy [ Sat Nov 20, 2010 19:12:58 ] |
| Post subject: | Re: roll centre bridge |
| Author: | Jan [ Tue Nov 23, 2010 08:31:00 ] |
| Post subject: | Re: roll centre bridge |
Hi guys, the new roll center bridges with refined holes have the same unchanged part number as the 4-hole versions. You just need to be looking for the V2 version indication. #333060 Graphite Roll-Center Bridge - V2 is the one with 6 holes (2.5mm). The 3.0mm version can be ordered as #333061 Graphite Roll-Center Bridge - V2. |
|
| Author: | Delboy [ Tue Nov 23, 2010 10:48:51 ] |
| Post subject: | Re: roll centre bridge |
Jan - thank you! |
|
| Author: | Aaron w [ Tue Nov 23, 2010 19:59:29 ] |
| Post subject: | Re: roll centre bridge |
I have probably just ended up with old stock then. 
|
|
| Author: | Delboy [ Wed Nov 24, 2010 12:43:22 ] |
| Post subject: | Re: roll centre bridge |
Hi Aaron - From what Jan has explained above you can get a 4 hole or a 6 hole bridge for part number 333060. The original bridge had 4 holes and the V2 has 6 holes. Both are 2.5mm thick. You must have had the original bridge, not the V2 333061 is 3mm thick and has 6 holes. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|