| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 220mm NT1 Set Up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10911 |
Page 1 of 1 |
| Author: | oldgit [ Tue Nov 02, 2010 23:27:50 ] |
| Post subject: | 220mm NT1 Set Up |
Does anyone have a good base setup for an NT1 converted for 220mm running? |
|
| Author: | Mark Christopher [ Fri Nov 12, 2010 15:28:56 ] |
| Post subject: | Re: 220mm NT1 Set Up |
hi if you start with the basic nt1 set up and fit a one way and a stiff or solid rear axle it will be fine, then fine tune to suit your driving style. there is a wide window of set up that these cars will work in. |
|
| Author: | oldgit [ Fri Nov 19, 2010 12:53:40 ] |
| Post subject: | Re: 220mm NT1 Set Up |
Thanks you. |
|
| Author: | kitracer [ Thu Nov 25, 2010 19:44:16 ] |
| Post subject: | Re: 220mm NT1 Set Up |
Our last 220 race, the TQ used front one way, rear 500,000 oil 37 all round tires do play with body position Adjust the front and rear width base on your tires off set. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|