XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Track Width measurement https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10782 |
Page 1 of 1 |
Author: | trini [ Fri Aug 27, 2010 01:51:02 ] |
Post subject: | Track Width measurement |
Guys I normally measure track width with the use of the setup board markings but I see alot of guys online using blank boards without the width stickers. How are you guys measuring it aqurately without the board sticker ? Hudy board from Setup system |
Author: | Roelof [ Fri Aug 27, 2010 16:13:13 ] |
Post subject: | Re: Track Width measurement |
Some are using a caliper to messure the whole width or the width to a steady pont on the chassis, some do use a springrule or a normal rule and others do not care and adjust it small. |
Author: | trini [ Fri Aug 27, 2010 17:03:34 ] |
Post subject: | Re: Track Width measurement |
Caliper interesting, I will give it a try |
Author: | Delboy [ Sun Aug 29, 2010 11:20:58 ] |
Post subject: | Re: Track Width measurement |
Trini, why change from using the Hudy board ![]() |
Author: | trini [ Sun Aug 29, 2010 17:04:12 ] |
Post subject: | Re: Track Width measurement |
I was just considering other methods just in case I carry along my Xray custom board which does not have track width markings |
Author: | Pahissa [ Thu Oct 14, 2010 15:50:48 ] |
Post subject: | Re: Track Width measurement |
In case you forget your Set-up boar you can always use a ruler or calipper if you find one which measures over 200mm. Nevertheless I wouldn't forget the board ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |