XRAY - Model racing cars

Guys I normally measure track width with the use of the setup board markings but I see alot of guys online using blank boards without the width stickers. How are you guys measuring it aqurately without the board sticker ?

Hudy board from Setup system

Some are using a caliper to messure the whole width or the width to a steady pont on the chassis, some do use a springrule or a normal rule and others do not care and adjust it small.

Caliper interesting, I will give it a try

Trini, why change from using the Hudy board - it's simple and accurate

I was just considering other methods just in case I carry along my Xray custom board which does not have track width markings

In case you forget your Set-up boar you can always use a ruler or calipper if you find one which measures over 200mm.

Nevertheless I wouldn't forget the board , it's the easiest way to measure.