XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
muffler spring mount wire https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10755 |
Page 1 of 1 |
Author: | helivaguy [ Thu Aug 12, 2010 23:34:46 ] |
Post subject: | muffler spring mount wire |
hello, i am using the max power 2649 tuned pipe and the muffler mounting spring is touching the steering knuckle. seems like the tuned pipe is too long but i was told this pipe system is made for the nt1. what gives? |
Author: | Mark Christopher [ Fri Aug 13, 2010 09:14:58 ] |
Post subject: | Re: muffler spring mount wire |
pipes are made for the engines, not for the cars |
Author: | helivaguy [ Fri Aug 13, 2010 23:23:11 ] |
Post subject: | Re: muffler spring mount wire |
i guess my max power max xxl3 is the problem?lol |
Author: | Roelof [ Sat Aug 14, 2010 01:03:37 ] |
Post subject: | Re: muffler spring mount wire |
With every engine the exhaust will get the same position..... You have to re-position the spring holding the exhaust like bending it upwards or move it closer to the chassis. Or just find a shorter exhaust which there is. |
Author: | helivaguy [ Sat Aug 14, 2010 01:32:22 ] |
Post subject: | Re: muffler spring mount wire |
tried that, the connection seals start to buckle at the header and muffler. no matter what i do this max power pipe is just too long for the nt1,its only a few millimeters from the tire. i got this from robert at ashford hobby and he told me it will fit perfect on the nt1 since the max engines and pipes are generally used on them. guess i will have to use one of my spare novarossi pipes, thanks for the help. |
Author: | Roelof [ Sat Aug 14, 2010 12:23:51 ] |
Post subject: | Re: muffler spring mount wire |
Then it is wise to check out the manifold, that can make the difference..... |
Author: | Delboy [ Sun Aug 15, 2010 09:23:14 ] |
Post subject: | Re: muffler spring mount wire |
We use a Novarossi 2652 muffler and a 6 fin manifold and have about 15mm between the muffler and the steering ball. The front edge of the manifold (where it joins the muffler) is roughly in line with the front engine mounting screws. Have you measured the overall length of your muffler and compared it with your Novarossi? |
Author: | helivaguy [ Sun Aug 15, 2010 13:53:47 ] |
Post subject: | Re: muffler spring mount wire |
the max power 2649 muffler is 10mm longer than my novarossi 2630(from the flange to the wire mounting nipple). the headers look to be the same dimentions as they are both inline with there engine mounting screws. |
Author: | Delboy [ Sun Aug 15, 2010 20:52:59 ] |
Post subject: | Re: muffler spring mount wire |
I have rechecked our car more accurately and can confirm that there is 15mm between the front of the muffler and the steering linkage. As I said previously. our car is fitted with a Novarossi 2652 and a Novarossi 6 fin manifold. I have also checked the the length of the 2652 muffler against the 2630 and they are both the same so you should have 5mm clearance when your Max muffler is fitted, as you've said that the Max is 10mm longer than the 2630. Do you have the latest NT1 with the adjustable wheelbase. If the wheelbase is at its shortest I think it will give you less clearance between muffler and steering linkage. |
Author: | helivaguy [ Sun Aug 15, 2010 22:25:48 ] |
Post subject: | Re: muffler spring mount wire |
i have the '09 kit, i am now using the novarossi 2630 and it fits perfect. so i am now stuck with a brand new maxpower 2649 that i cannot use...it wont even fit on my serpent 720,mugen mtx4r or kyosho v-one rrr. |
Author: | trini [ Sun Aug 15, 2010 23:28:42 ] |
Post subject: | Re: muffler spring mount wire |
I guess that is why the World Champhion used the Nova 2652 on his Max |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |