| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Clutch Setup - Which side hole is used? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10544 |
Page 1 of 1 |
| Author: | ERazer [ Mon Jun 07, 2010 05:18:46 ] |
| Post subject: | Clutch Setup - Which side hole is used? |
I've looked at the documentation and still cannot tell which hole is used for the 3 centrifugal throw out pieces go in. When looking at the flywheel with the 3 pins pointing towards me - which hole do the black throw outs go in - left hole or right hole. It does engage and I am sure I've tried both ways, but maybe I put it back in the same one. The CEN Clutch is the same way and I do not want to tear it apart since it is finally adjusted perfectly. posting.php?mode=post&f=21&sid=efece12de287d1a36609c9d7f2d88979#http://forum.teamxray.com/posting.php?mode=post&f=21# |
|
| Author: | Pahissa [ Tue Jun 15, 2010 12:39:33 ] |
| Post subject: | Re: Clutch Setup - Which side hole is used? |
Hi, use the left holes. It actually engages either way but the natural way to mount this part is by using the left hole. Cheers. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|