| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New to NT1 - what spares and hopups are needed? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10375 |
Page 1 of 1 |
| Author: | akaver [ Wed Apr 07, 2010 17:27:47 ] |
| Post subject: | New to NT1 - what spares and hopups are needed? |
Hi, I'm new to 1:10 IC touring, starting this season with NT1 2010 spec. What would be essential options/upgrades to get? And what are most needed spares - what goes first in crash, and what wears out? Its the only NT1 around, cant source any help from trackside. akaver |
|
| Author: | Zapalot [ Thu Apr 08, 2010 00:41:43 ] |
| Post subject: | |
| Author: | rx7ttlm [ Sat Apr 10, 2010 02:12:48 ] |
| Post subject: | Re: New to NT1 - what spares and hopups are needed? |
| Author: | Pahissa [ Fri May 21, 2010 13:50:24 ] |
| Post subject: | Re: New to NT1 - what spares and hopups are needed? |
Hi akaver apart from the usual set up stuff, like springs, roll bars pinions and spurs. I would recommend the optional XCA clutch. It actually gives more power and works much more consistent than the standard clutch. Nevertheless if you don´t want to buy the whole XCA clutch you can use the hard spring on your standard one. Sure it will improve your engine´s performance. It´s also interesting to have the hard springs for the 2-speed gear set. it will also make this part work better, specially on the long runs. Cheers |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|