XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Fuel filter / Pressurization cooler https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10103 |
Page 1 of 1 |
Author: | arnaudvasquez [ Mon Jan 18, 2010 14:44:12 ] |
Post subject: | Fuel filter / Pressurization cooler |
A very good afternoon to all. I've just bought my first Xray NT1 and I was wondering if anybody had an opinion on an extra fuel filter and pressurization cooler. Is it race legal, a pain to install, worthy or total waste of time? Cheers! |
Author: | Roelof [ Mon Jan 18, 2010 15:44:44 ] |
Post subject: | |
I have made my own backpressure cooling: It is legal, even when you place one between the fuelline to the engine but be carefull that the total tankvolume to the carb will be messured, most drivers are using a small Tornado fuelfilter as extra filter and cooling. The working of this is tested here: http://www.infinity-hobby.com/main/arti ... les_id=172 The final temperature of the fuel will be cooler and more constant which will give a better running engine during the heat/final. |
Author: | arnaudvasquez [ Mon Jan 18, 2010 16:17:49 ] |
Post subject: | |
Nice work! Very neat. I personally bought an RB cooler... I'm more lazy ![]() Thanks a lot for the info, link and picture. Cheers. |
Author: | musti72 [ Tue Jan 19, 2010 13:42:45 ] |
Post subject: | |
Author: | Roelof [ Tue Jan 19, 2010 16:20:09 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |