| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| max power engine break in https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=10034 |
Page 1 of 1 |
| Author: | frontrunner [ Wed Dec 30, 2009 00:15:37 ] |
| Post subject: | max power engine break in |
| Author: | KWT-NT1 [ Wed Jan 13, 2010 11:27:24 ] |
| Post subject: | |
| Author: | ERazer [ Mon Feb 22, 2010 06:20:31 ] |
| Post subject: | Hudy Break-In stand |
I just used the Hudy break-in stand. It's documentation says to run several tanks (125CC) at 25% for 10 min each period with complete cool down between sessions, the go to 50% for several tanks then 70% for several. During all of this time run slightly rich, and keep engine between 200-250 degrees. With the fan attached to the main shaft I never went over 200, and when I got to 50% I was in the 160 range. I'm not sure what you meant by fully engaged clutch? Are you running the car on the ground or on a stand? From what you said, much more fuel is used by the grinder, who broke in my RB 9T |
|
| Author: | ds motorsport [ Wed Feb 24, 2010 15:25:56 ] |
| Post subject: | Re: Hudy Break-In stand |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|