I'm just wondering if anyone suggest on how the Orion Alpha Engine sit perfect into the NT1-2010 spec engine Mount.
I have problem with it as it dun seem to sit well ... could anyone please help
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY NT1 ---- General Forum https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=21&t=4706 |
Page 15 of 16 |
| Author: | musti72 [ Wed Jan 13, 2010 15:25:47 ] |
| Post subject: | |
Wide bumper improves airflow under the body. |
|
| Author: | Roelof [ Wed Jan 13, 2010 19:55:34 ] |
| Post subject: | |
| Author: | Manolis [ Wed Jan 13, 2010 22:22:10 ] |
| Post subject: | |
| Author: | Pahissa [ Thu May 20, 2010 22:01:34 ] |
| Post subject: | Re: XRAY NT1 - 2009 Specs --- General Forum |
Hi all, I´ve been testing various belts along the past months and have found that using just the optional kevlar mid belt improves both the transmission and the durability of the pulleys affected by this belt. The car feels very loose and due to the kevlar material the pulleys don´t accumulate rubber or dust, while while with the estandar belt I usually have to clean the pulleys frequently. Additionally with this you don´t need to drill the pulleys covers (something many do in order to avoid dust in the pulleys). Hope it helps someone |
|
| Author: | Roelof [ Fri May 21, 2010 10:41:00 ] |
| Post subject: | Re: XRAY NT1 - 2009 Specs --- General Forum |
I always spray a teflon or silicone spray on the belts (and pulleys). It keeps dust away from sticking on these parts and make the belts run smoother. |
|
| Author: | babyiphoone [ Tue Jun 08, 2010 05:03:39 ] |
| Post subject: | Re: XRAY NT1 - 2009 Specs --- General Forum |
I'm just wondering if anyone suggest on how the Orion Alpha Engine sit perfect into the NT1-2010 spec engine Mount. I have problem with it as it dun seem to sit well ... could anyone please help
|
|
| Author: | Martin Hudy [ Wed Jul 14, 2010 09:31:55 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
Hi, Teemu is using this engine and his fits into the engine mount. Does your engine fit there hardly or not at all? It does not fit where the pins are? |
|
| Author: | Manolis [ Sun Sep 05, 2010 16:32:16 ] | ||
| Post subject: | Re: XRAY NT1 ---- General Forum | ||
...On this picture i noticed the ruler for measuring the quantity of fuel... Is this an optional part,or is it custom made ?...And how it works ? The picture is from 2010 Sedan Worlds,by redrc.net.
|
|||
| Author: | trini [ Sun Sep 05, 2010 16:46:37 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
I believe it is an option as Orcan has the same and Dirk has been using it for some time |
|
| Author: | brano [ Mon Sep 06, 2010 07:16:50 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
This is XRAY sticker - #338690 Fuel Tank Capacity Sticker (4). |
|
| Author: | Manolis [ Sun Oct 17, 2010 13:20:30 ] | |||
| Post subject: | Re: XRAY NT1 ---- General Forum | |||
The difference in weight is obvious.... i.e:The diff is filled with silicone.
|
||||
| Author: | roger999 [ Thu Nov 04, 2010 18:43:34 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
hi, what size of battery pack i can use for receiver in nt1? wanted to buy some lipo or better life 6.6v to do not use lipo regulator... i have found battery pack life that size: 85x30x17.5mm. Does it fit or not really? And one more, do I need to change battery tray from composite to more heavy? That life is 83g about... |
|
| Author: | Alex38 [ Sat Feb 05, 2011 17:22:30 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
 Hello from France,@Roger999: I've got the NT1 Limited Edition and i 've LIFE 1100 VTEC 6.6v; this is the best solution because: -Lipo have 7v and need adaptator _Lipo must be recharged when arrive to 5.5v, if not the lipo is definitely dead -So you use 7-5.5=1.5v only (20/30 mn run) after you have to change it ( and stop the car... -life 1000 vtec is easy, you can use it until the end of power without problem (10/15h run) and cost 45€ Hope it help you !  [sorry for bad English 
|
|
| Author: | Alex38 [ Sat Feb 05, 2011 17:27:05 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
| Hello from France! Is the "composite belt pulley" saw on Ralph Burch' car [   ] can be buy somewhere?Thank you for answering, best regards
|
|
| Author: | roger999 [ Mon Feb 07, 2011 19:10:42 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
thanks a million Alex38 but where i can buy it? for now i got ORION MARATHON nimh but 1900 mAh so is not too bad. |
|
| Author: | Hagberg [ Thu Feb 10, 2011 00:58:41 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
| Author: | JC Borcy [ Sun Feb 20, 2011 12:39:48 ] | ||||
| Post subject: | Re: XRAY NT1 ---- General Forum | ||||
|
|||||
| Author: | roger999 [ Thu Mar 03, 2011 17:22:52 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
| Author: | NikoRacing [ Sat Apr 07, 2012 17:18:24 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
Hello to all! I write here because of a problem that I and many racers in Italy are having. I race with the NT1 since it has been launched on the market in the end 2008. I have the right feeling with the car and I think the product is still the best. Materials are ever at the top and I'm happy to pay a little more than other brands because I know I'm sure to have the right car. The problem is that times to have the spare parts and optional parts aswell are getting longer and longer (if not impossible). I hate to buy things out of Italy because I prefer to have contact with people I can see and talk directly. But many drivers are thinking to buy something else stressed by this situation. I already have a NT1 2012 so I will keep racing with XRAY despite all but I hope this situation will better soon. example: I'm waiting for a lightweight 2speed shaft for 3 weeks up to now... and a friend is also in the same condition. He also waits a 2011 chassis since october...and yesterday he gave up  Hope my voice will be heard Thank you Xray! 
|
|
| Author: | brano [ Tue Jun 05, 2012 14:05:17 ] |
| Post subject: | Re: XRAY NT1 ---- General Forum |
The 335511 2-Speed Shaft - Lightweight was in production so therefore the delivery time was so long, however now it is back in stock. The 331102 chassis 2011 is not available anymore and you can get only the new one 331103. I suggest you will contact directly your distributor in Italy at info@sprintrc.it who will be happy to answer all your questions. P.S: sorry for late response |
|
| Page 15 of 16 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|