XRAY - Model racing cars

Hi,

My NT1 marks 2100g on the scales with body and fuel, ready to race (except transponder). I have no optional lightweight extras installed.

EFRA limit is 1700g.. that's 400g away... Is it possible to get anywhere close to that limit.

A good start would be removing the engine .... Seriously though.. what do you cars weigh in track ready form... and how did you achieve that weight?

2100? My xray NT1 weights 1750 gr and I don't wear too options.
Rewards.

maybe i should try another set of scales...??

as i said 2100g on the track! with fuel etc...
and it's absolutely clean... no number of weeks of dirt building up..

g

The 1700 gr is without fuel !!! (= 70 gram)

Do you have thick painting or some HPI showbody ? That can make a difference with 50 gram. Are you using full size tires then also you have 20 grams more.

body is altis 2.3 with 3 coats
tyres are new out of the box... I don't have a truer.

g

Hello from France,

you have to weigh your car without fuel (-70g), the smaller tires you have (-20g), light body (not too much paint - 20g)...

My car ready to run weighs 1700g, without fuel, small tyres (RB Speedline 55mm daimeter), KO 2413 servos, lightweight Hudy transmissions, stratus 3, intellect 1400 battery (heavy but well postionned at CG).

I will post soon a complete post on " How light is the NT1?"

Au revoir.

hi,
my car (NT1 2012) weighs 1740g with 2 lp servos, nimh battery, tires 56mm and SRS-N light. Obviously engine included.

here: http://www.teamxray.com/teamxray/produc ... XRAY%20NT1

because my car does not weigh 1646g as reported there?

thanks

My NT1 2013 weighs in at 1660. I use the following option parts:

Lightweight Carrier for 2-Speed Gear (2nd) - Alu 7075 T6 + Ball-Bearing - V2 #335521
Alu Front Middle Shaft Holder #335721
Alu Lightweight Locating Collar (2) #335731
Alu Radio Plate Mounts (L+R) - Swiss 7075 T6 - Orange #336231-O
Alu Differential Pin - Hardcoated (2) #335081
Titan Pivot Ball 8.4mm (4) #337255
Composite Wide Bumper #331201
Alu Rear Bulkhead Cover #333051

Other things to consider:

Titanium screws
Alu wheel nuts
Low profile servos
Receiver bracket instead of Radio box #336040
SRC Low LiPo battery, LP1500-2S with the optional LiPo Battery Plate #336156
Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2) #303212-O

PROTOform lightweight bodyshells, SRS-N or P37-N