XRAY - Model racing cars

Up for sale is the Ultimate Xray M18T with loads, (LOADS) of extras. Been used most indoor and just a little outdoors..
It's in very good condition.

Upgrades it has
Xray M18T kit - $135.5
It has 2 Original Xray Carbon Chassis One blue and one black - Value $207
2x Xray Alu Motor Mounts - $54
6x Xray Alu shock Towers (3 front and 3 for the back of it) - $179
4x Xray Alu suspension blocks for the whole car - $153
3x Anti-roll bars front and rear - $15
Xray Adj. Turnbuckle Set For Toe-In Adjustment - $16.75
Xray Alu Drive Shaft M18T - Set (2) on the rear of the truck + one extra spare alu drifeshaft - $54.25
Xray Drive Shaft M18T - Hudy Spring Steel™ (2) for the front of the car - $51
Xray Graphite Main Driveshaft - $24
Team Associated Steel Pinion Gear 12t - $5
Xray Steel Spur Gear 54T / 48P + Composite Spur Gear Adapter - $29
Xray Carbon Battery Holder Blue - $18
Xray Carbon Battery Holder Black $18
M18T Nickel Coated Pivot Ball 4.2mm Type C (14) - $14.5
M18T Nickel Coated Pivot Ball 4.2mm Type E (4) - $7.25
M18T Nickel Coated Pivot Ball 6.3mm Type A (14) - $14.50
M18T Nickel Coated Pivot Ball 6.3mm Type B (8) - $11.50
M18T Nickel Coated Pivot Ball 6.3mm Type D (2) - 4.25
XRAY Spring Front + Rear (4+4) - Set M18MT - Soft - $17.50'
XRAY Spring Front + Rear - Set NT18T - Medium - $11.50
12 Xray Alu Oil Shock Absorbers. 6 for the back and and for the front of the car so you have loads of spares - $162
Xray M18T Powerpack pro without Xray Servo - $100
12 sets of tire.
9 Original M18T tires very very little used all of them has wheel except two. And two of them are still in original packages and unglued.
1 Set of onroad tires and 2 for the M18MT. The Tires for the M18MT are prett worn down. But they can still be used.
9x Xray Micro Truck M18T Pin Tire & Insert - 132.75
M18MT Tires (Thrax and Chevron with white wheels on both) - $45
8 Complete sets of aerodisk wheel glued on the tires - $64
Xray Alu Adj. Ball Differential - Hard Coated - Set (Used but not mounted) - $53.25
Front One-Way Differential - Set - Blue for the front (Not Mounted) - $61.25

Spare Parts:
14x Suspension arms $80
Extra Gearbox Case for front and rear - $36
Extra Wheel Nuts - $6
Lower Front & Rear Bumper M18T - $9
Some Steering Parts - $20
Some Comosite Pivot Balls $5
Some Extra Screws $15
Shock Absorer Membranes $7
E-Clips $10
Ajustable Shock Clips $5
Plastic pinion gears $6
Extra Body Clips $5
Some extra bearings - $20
2 Plastic Pinion Gears - $6
4x Composite Ball Differentials $108



Most of Original Parts is also included like like plastic chassi and topdeck, motor mount, shock towers, springs differentials, steering parts, plastic driveshafts etc.

Unoriginal Upgradees. (Not mounted on the car)
Mini-t onroad Tires $13
3Racing Alu Steering Blocks $23
3Racing Alu Steering Servo Mount $8
Many 3Racing Titanium Turbuckles $30-40
Many Extra Atomic Plastic Spur Gears $30
Complete New Set Of Rubber Shielded Bearings $20
T-Bone Racing Front Bumper - $10
1x 3Racing Alu Driveshaft - $7

Electronics Setup
Hitec HS-82MG Servo $25
Casle Creations Mamba 25 Esc with Mamba 5400 motor - $120
Mamba 4200 Motor $40
2x Turnigy 1300mAh 3S 30C Lipo Pack - $16.72
1x ZIPPY Flightmax 1300mAh 3S1P 20C - 7.43
Castle Usb Programming card. $20
Esky EK2-0704B Gyro $20
Air Tronics 94091 Servo that can be modded to fit. But the HS-82MG that is already on it is better.



The truck come with two wings with carbon wing mounts.
It has 1 RC18B buggy body, one Original M18T body both in ok/good condition. And a pretty messed up M18MT body, but it can still be used.

Total value for all this is over $2300. You With some extra parts you could build a new truck or two with all this ...

Im selling this becouse i don't to any indoor track racing anymore. Don't have time to it as i go to school.

Come with bids. I am not too much into rc anymore so i don't know how much this is worth.

Let me know when you land on a price i may be interested. Looking to get back in