XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
motor for NT18 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=8172 |
Page 1 of 1 |
Author: | matt_xb8r [ Tue Aug 26, 2008 23:33:07 ] |
Post subject: | motor for NT18 |
Author: | geezatec [ Thu Aug 28, 2008 07:16:22 ] |
Post subject: | |
Two engines replaces the Toki engines. P-0 and Drake. Picco P-0, IMO the better of the two. May have use a dremel to custom fit. Take your time, you'll be satisfied of performance. As for pinion you choose, you have experience with 8th & 10th scale model. You know what you want, low or Hi torque. Its easy for you to decide. For Exhaust system, Stock is ok, but better of useing the NT18T 3 piece exhaust system. Like 8th & 10th scale you have tuned pipes. Nt18T 3 piece more adjustable on the rubber coupler. The shorter between header & muffler you have low end torque, Longer the coupler the higher torque you get. Have fun with it. The little bugger will run like the little monster. |
Author: | matt_xb8r [ Thu Aug 28, 2008 16:27:30 ] |
Post subject: | |
Author: | Roelof [ Thu Aug 28, 2008 19:35:14 ] |
Post subject: | |
Author: | matt_xb8r [ Fri Aug 29, 2008 05:27:58 ] |
Post subject: | |
Author: | geezatec [ Fri Aug 29, 2008 06:33:54 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |