XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Both servos burned within 2 mins of each other...(NT18) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=5319 |
Page 1 of 1 |
Author: | foxy42 [ Sun Apr 22, 2007 18:01:04 ] |
Post subject: | Both servos burned within 2 mins of each other...(NT18) |
Author: | geezatec [ Mon Apr 23, 2007 06:58:32 ] |
Post subject: | |
Author: | mario [ Mon Apr 23, 2007 08:13:38 ] |
Post subject: | |
Author: | foxy42 [ Mon Apr 23, 2007 08:47:01 ] |
Post subject: | |
Author: | Mini_Me [ Mon Apr 23, 2007 15:50:25 ] |
Post subject: | |
Author: | foxy42 [ Tue Apr 24, 2007 10:48:06 ] |
Post subject: | |
Author: | romeo_charlie337 [ Mon May 07, 2007 07:21:12 ] |
Post subject: | Srevo Breakages |
foxy42 you stated that you use a 6v battery pack but you did not state what servos you were using? Some of the micro servos used in the Mini/Micro cars are only rated to use 4.8v. If you use 6v packs it is at your own risk as stated by the manufacturer. I use a 6v pack in my NT18T and am having no problems but my servos are rated for 6v. I would sugest checking this out first before looking else where. And as for transmitter/reciever causing any issues I use a Nomadio Sensor in my car and no problems, so I hope it all falls into place for you . |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |