| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| NT18T engine? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=4730 |
Page 1 of 1 |
| Author: | 999R [ Sun Dec 24, 2006 09:53:22 ] |
| Post subject: | NT18T engine? |
Would like to check with u guys that how the engine performance, tuning n any oil leaking problem? I am interested to get one but worry about the engine! The engine looks very much like the NB16 buggy engine and that engine giave me lot of leaking n tuning 
|
|
| Author: | geezatec [ Sun Dec 24, 2006 10:47:11 ] |
| Post subject: | |
Same Toki engine used in the NB16. I was lucky enough that the engine didnt leak just alot of tuning. Plus w/o plastic ex. manifold and muffler. Use the correct fuel the engine specs. Te engine likes to run lean. My engine lasted me 7 gallons of fuel. Still was running till I change to the Picco-Zero. Just a suggestion. Purchase the model w/o the engine, and purcase the Picco. or , purchase the picco and install it in the NB16. |
|
| Author: | irish [ Tue Dec 26, 2006 19:22:10 ] |
| Post subject: | Re: NT18T engine? |
| Author: | kant76 [ Tue Dec 26, 2006 23:53:30 ] |
| Post subject: | |
well I have run both of my toki engines and one is leaking and the other one is not. so far I have run around 20L thrug the first engine (the leaking one) my engines are punished to the maximum limit because I run at a scaled 1/18 asphalt track, so the engine don´t get so good cooling. but it seames to me like the engine actualy like being punished a littel. I adjust it a littel more buggy style because of the layout of the track. the tuning of this engine are actualy pretty easy once adjusted it´s just the normal lean/fat adjustment needed. |
|
| Author: | nitrotime [ Sat Feb 10, 2007 02:36:25 ] |
| Post subject: | |
| Author: | geezatec [ Wed Feb 14, 2007 21:18:14 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|