XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
nt18 part for carb https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=4215 |
Page 1 of 1 |
Author: | damian [ Mon Sep 11, 2006 20:14:24 ] |
Post subject: | nt18 part for carb |
I need the metal ring and brass ball that the throttle conects to on the carb.I snapped the brass ball off and the remainder is stuck in the metal ring on the carb. Anyone know if i can buy this part as i cant find it listed. |
Author: | geezatec [ Mon Sep 11, 2006 22:12:22 ] |
Post subject: | |
Try bring it to your LHS. I think they're universal, to any type of carb. the differance is one piece instead of aluminum/brass. |
Author: | phatmonkey [ Tue Sep 12, 2006 06:43:59 ] |
Post subject: | Try this |
I had this happen to my nt18 car engine.I drilled the old post out, since it is brass is will drill out easily, then use a steel 1/16 ballstud and thread it into the aluminum carb piece.Now with that said do this at your own risk I had nothing to loose since the carb needed fixed or I was out of luck. |
Author: | damian [ Wed Sep 13, 2006 00:59:47 ] |
Post subject: | Re: Try this |
Author: | geezatec [ Wed Sep 13, 2006 01:07:30 ] |
Post subject: | |
Author: | damian [ Fri Sep 15, 2006 05:12:02 ] |
Post subject: | |
Author: | geezatec [ Fri Sep 15, 2006 06:33:06 ] |
Post subject: | |
Author: | Mark Harris [ Sat Sep 16, 2006 19:17:42 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |