| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| After Market wheels https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=3923 |
Page 1 of 1 |
| Author: | BigMA [ Fri Jul 21, 2006 00:57:33 ] |
| Post subject: | After Market wheels |
| Author: | Str8tNitro [ Fri Jul 21, 2006 17:59:00 ] |
| Post subject: | |
Am interested on tire & wheels. Know about three model that fits Xray. Do you have a web sight on AVN wheel? I.d like to surf on the subject. Thank Ya! |
|
| Author: | BigMA [ Sat Jul 22, 2006 04:07:32 ] |
| Post subject: | Aftermarket wheels |
Yea that would be http://avn-racing.com that should take you there. |
|
| Author: | Str8tNitro [ Sat Jul 22, 2006 06:29:03 ] |
| Post subject: | |
Site doesnt exist!! you have another site I can go to?? |
|
| Author: | StevenDutchie [ Sun Jul 23, 2006 08:57:42 ] |
| Post subject: | |
| Author: | Roelof [ Sun Jul 23, 2006 12:36:32 ] |
| Post subject: | |
| Author: | Str8tNitro [ Sun Jul 23, 2006 15:40:43 ] |
| Post subject: | |
| Author: | geezatec [ Mon Jul 24, 2006 19:33:19 ] |
| Post subject: | |
If you go to AVModeller. Go to international Dealers Have 5 dealers here in US. Two listed are promising.... |
|
| Author: | WerxRacing [ Sun Jul 30, 2006 04:14:07 ] |
| Post subject: | |
Well I have 6 Xmods ( like the Mini Z) & just got me a NT18. I think they should work if the have a set for the M18 & the HPI Micro RS4. I just got the HPI Mustang Cobra body for my NT18. |
|
| Author: | geezatec [ Sun Jul 30, 2006 06:23:46 ] |
| Post subject: | |
I'm sure the HPI body wont fit. cuz HPI bodies are 140mm, Xray are 150mm. The only body of hpi in the Mercedes CLK,Corvette, Lambo, Skyline, which is 150mm. They say BMW is 150, its actually 140mm. Have to look that up. Would like to see the Cobra as a body. If it is 150 let me know. |
|
| Author: | WerxRacing [ Sun Jul 30, 2006 07:30:22 ] |
| Post subject: | |
I was woundering the size, but just got two of them. The first I got last summer for a HPI I was building & the other tonight for the Xray. Well the bodys are going to be for a nother project I geuss. |
|
| Author: | Roelof [ Sun Jul 30, 2006 09:26:07 ] |
| Post subject: | |
Beside that, the HPI bodies are not that wide to fit a NT18. |
|
| Author: | WerxRacing [ Sun Jul 30, 2006 14:31:48 ] |
| Post subject: | |
Yea geezatec said they are 140mm & need to be 150mm. That is my luck. They need to get bodys started................. |
|
| Author: | geezatec [ Sun Jul 30, 2006 18:49:13 ] |
| Post subject: | |
Other bodies are from PTI also supplies Xay. Protoform has the Mazda6, and new arrival of Dodge Stratus 3. Xray did come out with a new body for the Ferrari360, for clearance problem with the exhaust. Which Kant reply on the other thread, the exhaust upgrade.. |
|
| Author: | WerxRacing [ Sun Jul 30, 2006 19:50:16 ] |
| Post subject: | |
I got a PTI 200mm 2005 Mustang. I want mustang bodies for my X-ray. Just big on my Mustangs. Got 4 in the drive way & close to 2 dozen R/C, plus over 800 hotwheel/diecast & models ofthe PONY cars |
|
| Author: | kant76 [ Sun Jul 30, 2006 23:36:15 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|