Thanks BBKing. Appeciate your feedback. It's good to see that I am on the right track. Just need to experiment a bit. Ed
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Glow Plug for NT18 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=3357 |
Page 1 of 1 |
| Author: | xsalpha [ Sun Apr 02, 2006 14:04:45 ] |
| Post subject: | Glow Plug for NT18 |
| Author: | bbking9 [ Mon Apr 03, 2006 04:35:32 ] |
| Post subject: | |
That is the one I use. Smaller engines need hotter plug. You might try another brand - or you could go to a medium plug just to try it out. |
|
| Author: | xsalpha [ Mon Apr 03, 2006 15:56:17 ] |
| Post subject: | |
| Thanks BBKing. Appeciate your feedback. It's good to see that I am on the right track. Just need to experiment a bit. Ed
|
|
| Author: | irish [ Wed Apr 05, 2006 00:36:00 ] |
| Post subject: | |
| Author: | acsubie [ Wed Apr 05, 2006 01:59:49 ] |
| Post subject: | |
| Author: | bbking9 [ Thu Apr 06, 2006 02:24:20 ] |
| Post subject: | |
I use OS A3. |
|
| Author: | xsalpha [ Sat Apr 08, 2006 13:51:36 ] |
| Post subject: | voltage |
I've been experimenting with the battery voltage for the glow plug (OS A3)and worked out that for the smaller NT18 engine, the 1.2v (I normally use on my 1/8 nitro buggy) from rechargables will usually make the car hard to start. Normal alkaline batteries with 1.5v make starting a lot easier. 
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|