XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
minor fault in the manual https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=18&t=3118 |
Page 1 of 1 |
Author: | kant76 [ Thu Feb 23, 2006 14:29:52 ] |
Post subject: | minor fault in the manual |
Author: | irish [ Thu Feb 23, 2006 16:39:07 ] |
Post subject: | Re: minor fault in the manual |
Author: | irish [ Thu Feb 23, 2006 17:23:24 ] |
Post subject: | |
Author: | brano [ Thu Feb 23, 2006 19:18:07 ] |
Post subject: | |
Author: | irish [ Thu Feb 23, 2006 19:32:36 ] |
Post subject: | |
Author: | kant76 [ Fri Feb 24, 2006 02:45:31 ] |
Post subject: | |
Author: | irish [ Fri Feb 24, 2006 10:07:41 ] |
Post subject: | |
Author: | GlennCauley [ Fri Feb 24, 2006 17:45:26 ] |
Post subject: | Linkages |
Ahhhh... welcome to the world of nitro ! ![]() One of the most important, and sometimes time consuming, things to do is to set up the throttle linkages properly... bend, cut, move, etc. At least the NT18 linkages are fairly straight forward... try a 1/10 or 1/8 nitro car linkages... THAT takes time. ![]() |
Author: | irish [ Fri Feb 24, 2006 21:10:04 ] |
Post subject: | Re: Linkages |
Author: | GlennCauley [ Sun Feb 26, 2006 15:30:30 ] |
Post subject: | Re: Linkages |
Author: | irish [ Sun Feb 26, 2006 16:32:05 ] |
Post subject: | Re: Linkages |
Author: | kant76 [ Sun Feb 26, 2006 19:40:50 ] |
Post subject: | |
Author: | irish [ Sun Feb 26, 2006 22:49:14 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |